Steel structures

New Web site 2.0

ELECTRONIC CARDS

 

Electronic cards for electrical motors DC (max 10A) and 220AC,useful for the control of your photovoltaic Tracker, are available. They are self-learning for the correlation of your frame (whatever it is) and the solar inclination. They can be used for trackers both with one release and two releases.

 

  • Low cost, high precision, high reliability, easy to use and to install,

  • very low self-use of energy, modular solution,

  • UNAFFECTED BY CLOUDS and NOT using sensors that have to be kept clean and calibrated,

  • Integrated CPU for the astronomical calculation.

 

This solar tracking system, thanks to low costs, to its lightness and its modular structure, is excellent for roof installation as well and allows to increase energy production of your modules up to 20-30%.

 TRK802

 Keyboard TRK801/802

for photovoltaic tracker's cards. Alternatively to pc settings, they are very useful for the settings on the field for any tracker's card. Through an easy set up your tracker will be ready to reach the sun.

 Ask for an estimate
schede per inseguitore fotovoltaico astronomico

Gearmotors DC CARD

(max 10A) for each photovoltaic tracker with astronomical tracking.

Motor torque overshoot sensor  for the overcoming of the forecasted weather conditions with the restoration of the horizontal position for 24 hours.

Cycle stop and start functions for the maintenance to your tracker.

Supplied by tension of 220VAC (optional 24 VDC)

Possibility to control by bus RS485 to synchronize more contemporaneous trackers or in a single way with an integrated self-learning microprocessor  

self-learning through  PC by port RS232 (DB9 female) or by portable keyboard

Functioning temperature -20°C - + 70°C

Humid 35% - 100% with no condensate

Integrated current measurement for detecting end of travel up to 15A

Possibility to be connected to  YOCTO GATE e YOCTO NET

Buffer battery for microprocessor for more than a week in case of lack of supplying.

2 digital inputs

3 analogical inputs 0-10 V 4-20mA

1 output relay with NO/NC switch contact able to drive resistive loads up to 5A 250Vac

Grade of protection IP20 on the terminal board . IP56 inside a frame with fairleads.

 

Ask for an estimate
schede per inseguitore fotovoltaico astronomico

Gearmotor AC monophase CARD

 

(max 10A) for  photovoltaic tracker with astronomical pursuing

Motor torque overshoot sensor  for the overcoming of the forecasted weather conditions with the restoration of the horizontal position for 24 hours.

Cycle stop and start functions for the maintenance to your tracker.

Supplied by tension of 220VAC (optional 24 VDC)

Possibility to control by bus RS485 to synchronize more contemporaneous trackers or in a single way with an integrated self-learning microprocessor  

self-learning through  PC by port RS232 (DB9 female) or by portable keyboard

 

Functioning temperature -20°C - + 70°C

Humid 35% - 100% with no condensate

Integrated current measurement for detecting end of travel up to 15A

Possibility to be connected to  YOCTO GATE e YOCTO NET

Buffer battery for microprocessor for more than a week in case of lack of supplying.

2 digital inputs

3 analogical inputs 0-10 V 4-20mA

1 output relay with NO/NC switch contact able to drive resistive loads up to 5A 250Vac

Grade of protection IP20 on the terminal board . IP56 inside a frame with fairleads.

Ask for an estimate

.